To Install RV Ladder
Rv ladder – Try owners often use all parts of their RV as RV homes on wheels and with a limited amount of space. This includes adding a number of different options in the RV, which protruding living or storage on the back of the RV. These additions can be expensive. An inexpensive alternative to using more space in an RV is adding an RV ladder, which allows owners to easily climb up on the roof of the RV, so it is used as a sun or star gaze.
These rv ladder is easy to install the proper tools. Space ladder at the desired location on the RV. Ladders are typically installed at the rear of the car. Contact ladder manufacturer if you want to install it elsewhere on the RV. Mark two holes in the top of the frame at the RV. These holes should be made on the spot where the ladder is connected to the frame. Drill two 3/32 inch pilot holes into the frame, about an inch deep.
Coat the bottom of the tabs assembly with caulk or silicone. Use a liberal amount. Attach the ladder with metal screws through the tabs caulked assembly. Tighten all remaining bolts and wipe off any excess sealant or repair. Let the caulk dry and bond with the surface of the RV. Carefully pull the ladder to ensure it is firmly attached. Tips & Warnings to install rv ladder; Bore holes are deeper and an inch to avoid damaging the frame of the RV.